YTRON - individual solutions
The success of YTRON is based on the exact admission and analysis of the individual application.
For local support, we recommend to contact our sales partners
YTRON aktuell
YTRON Technology
The YTRON-Y creates a pure axial jet stream. It rapidly and homogeneously mixes, without aeration, liquids and viscous products.
Copyright
Copyright © 2009 YTRON Process Technology GmbH & Co. KG. All rights reserved.
Impressum
YTRON-Y jet stream mixer - Principle
YTRON-Y creates a pure axial jet stream.
It rapidly and homogeneously mixes, without aeration, liquids and viscous products. Vortex formation, normally associated with conventional agitators, is eliminated.
Disadvantages of Conventional Agitators
- Radial flow pattern (rotational flow)
- Non-uniform and incomplete mixing
- Vortex formation, strong aeration, (Result: Oxidation, change of colour, problems with the heat transfer etc.)
- Sedimentation
- Floating
- Incomplete mixing of the vessel contents
- Dead zones around the area of the baffles
- Local shear forces, long process times
- Side entry: Product contacts the seal directly
Advantages of YTRON-Y Jet Mixing Turbine
- Axial flow pattern
- Homogenous mixing
- No air entrainment
- No sedimentation
- No floating of product on the surface
- Rapid mixing of entire container contents
- No baffles / flow deflectors required, flow deflectors are integrated in stator
- Low shear due to short residence time in the YTRON-Y mixing head
- Rotor in contact with the moving product only
- Rapid process time
- Side entry: Air cushion prevents product from contacting the mechanical seal surfaces at the top of the shaft.
The choice of the right YTRON-Y depends on each individual case, to get the optimum results for the specific application.
YTRON-Y Comparison of working phases
YTRON-Y Examples
YTRON-Y Installations possibilities