- 1: YTRON-Y jet stream mixer.
- 2: YTRON-Y ByPass .
- 3: YTRON-XC powder disperser.
- 3.1: Recirculation.
- 3.2: InLine.
- 3.3: Examples powders.
- 4: YTRON-ZC powder disperser.
- 5: YTRON-PID powder disperser.
- 6: YTRON-Z homogeniser.
- 7: YTRON-AEROTRON .
- 8: Terminology.
YTRON - individual solutions
The success of YTRON is based on the exact admission and analysis of the individual application.
For local support, we recommend to contact our sales partners
YTRON aktuell
YTRON Technology
The YTRON-Y creates a pure axial jet stream. It rapidly and homogeneously mixes, without aeration, liquids and viscous products.
Copyright
Copyright © 2009 YTRON Process Technology GmbH & Co. KG. All rights reserved.
Impressum
The XC Principle
Powders and compounds with a tendency to form lumps are continuously incorporated inLine and effectively dispersed. This means that even in a single pass, very high concentrations can be achieved. The first stage in the reactor head creates a strong negative pressure and sucks the solids phase in. Immediately after contact with the liquid phase, this premix of the 2 phases is impelled against the XC impact chamber plates where the liquid is absorbed into the powder phase. The second stage discharges the homogeneously wetted product.
Important advantages of YTRON-XC
- Complete wetting out of the powders in a single pass
- Concentrations of up to 40% are possible in a single pass
- No air entrainment other than the air included in the powder phase
- Batch time reduced to the minimum
- Higher product yield due to the intensive wetting of the powders
- Low intensity mixing due to high impact frequency instead of high shear
- Feeding from Big Bag or silo
- CIP and SIP
Animation YTRON-XC
YTRON-XC rezirculation
YTRON-XC InLine
Examples powders